Emergency Exit Light Installation Perth

Emergency Exit Lighting Done Properly Across Perth

When mains power fails, your emergency and exit lighting is what gets people safely out of the building. Spark Tech Electrical installs, upgrades and certifies emergency exit lighting for offices, warehouses, retail spaces, strata complexes and other commercial premises across Perth. We are a licensed electrical contractor (EC 17280) based in Padbury, so we cover Joondalup, Hillarys, Duncraig, Scarborough, Stirling and Wanneroo quickly, and the greater metro on request.

Every system we install is wired and tested to the relevant standards so it does its job in a real evacuation, not just on the day it was fitted. If you are fitting out a new tenancy, extending a building or replacing aging fittings that no longer hold a charge, we will design a layout that meets code and passes inspection.

What Emergency Exit Lighting Actually Has To Do

Emergency lighting is split into two jobs. Exit signs (the green running-man pictograms) mark the path to the exits and stay illuminated on their own battery backup. Emergency luminaires, sometimes called spitfire or maintained lights, throw light along corridors, stairwells and open floor areas so people can see where they are walking when the normal lights go out.

Both run from internal batteries that take over the instant mains power drops. The system has to keep that lighting going long enough for a full, orderly evacuation. Get the spacing, mounting height or battery duration wrong and the building will not pass certification, which can hold up an occupancy approval or a lease.

Design And Installation To AS 2293 And AS/NZS 3000

Emergency and exit lighting in Western Australia is governed by AS/NZS 2293 for the system itself and AS/NZS 3000 (the Wiring Rules) for the electrical installation behind it. We design the layout around your floor plan, exit locations, ceiling heights and how the space is used, then install fittings at the right points so coverage and sign visibility meet the standard.

Our installation work includes:

• Exit signs over and along the path to every required exit
• Emergency luminaires through corridors, stairwells, plant rooms and open areas
• Dedicated circuits and correct connection back to the switchboard
• LED upgrades to replace old fluorescent or failing battery fittings
• Single-point or addressable systems for larger or multi-tenancy sites

Testing, Servicing And Logbooks

Installing the lights is only half of it. The standard requires a discharge test where the fittings are run on battery for their full rated duration to prove the batteries still hold up under load. Over time batteries lose capacity, so a fitting that looks fine can fail the moment the power actually cuts.

Spark Tech Electrical carries out scheduled testing, replaces tired batteries and lamps, and keeps your logbook up to date so you have clear evidence of compliance for insurers, building auditors and your own records. We can set you up on a recurring six-monthly cycle so it is handled without you having to chase it.

New Fit-Outs, Upgrades And Fault Repairs

We work across the full lifecycle of a system. For new fit-outs and refurbishments we design and install from scratch alongside your other electrical works. For older buildings we audit what is already there, flag fittings that no longer comply or hold charge, and quote a staged upgrade so you are not hit with the whole cost at once.

If something is already faulty, a sign that will not stay lit, a luminaire that fails its discharge test, or a circuit fault, we diagnose and repair it. LED replacement fittings draw less power, last longer and usually pay back through lower maintenance, so an upgrade is often the smarter call than repeatedly patching old hardware.

Why Use A Licensed Perth Electrical Contractor

Emergency lighting is life-safety infrastructure, so it should only be installed and certified by a licensed electrical contractor. As EC 17280 we are accountable for the work under EnergySafety WA (Building and Energy), and we wire everything to AS/NZS 3000, including the WA requirement for proper RCD protection on circuits. Where any work touches the supply, metering or network side, Western Power is the network operator we coordinate with.

That accountability matters when an auditor, insurer or incoming tenant asks for proof your system is compliant. You get correct documentation, a system that actually performs in an outage, and a local team that can come back to test and service it.

What Affects The Cost

We never quote a flat figure sight unseen because no two buildings are the same. The price depends on the floor area and layout, the number of exit signs and emergency luminaires required, ceiling height and access, whether you are installing fresh or upgrading existing fittings, the type of system (single-point versus addressable), and how much cabling needs to be run back to the board.

The honest way to price it is a site assessment. We will walk the premises, work out exactly what the standard requires for your building, and give you a clear written quote with no surprises. Ongoing testing and servicing can be quoted as a separate recurring arrangement.

Book A Spark Tech Electrical Assessment

If you need emergency exit lighting installed, upgraded, tested or certified anywhere in Perth, get in touch. Spark Tech Electrical works out of Padbury and services the northern suburbs and wider metro. Call 0461 359 510 or email info@sparktechelectricalperth.com.au and we will arrange a site visit and a straight quote.